ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source

  • Rating :
    4 (1 Customer Reviews)   
  • Wholesales Price :
    Quantity 1-4 5-9 10-19 20-49 50+
    Price US$2,148.99 US$2,084.52 US$2,063.03 US$2,041.54 US$2,020.05
    Large Order:  

    secure payment

    we ship worldwide

    • Description:
    • ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source    
    Outline
    AT8010D high frequency standard signal generator, you can set the carrier frequency (5kHz ~ 1100MHz), can output FM / AM modulation and-14dBμV ~ 126dBμV (EMF) of the RF level. And get ready low FM / AM Diatotion and high S / N ratio Memory storage function, so right in the RF (Radio Frequency) relationship between development and repair.

    <BR> Carrier frequency sine wave carrier frequency for manufacturing PLL (Phase Locked Lop) IC, the range 5kHz ~ 1100MHz, to bring DPLL (Digital PLL) carrier frequency loop can create and hold a high degree of stability depend on degree. Expressed directly through the LCD Display all the set frequency, with the panel number keys directly set the desired frequency, or set the Delta Step with the UP / DOWN buttons or the Rotary Switch and Delta Step variable frequency.

    Modulated with 400Hz and 1KHz <BR> internal and external modulation sources can be frequency modulated signal source modulation and amplitude modulation. Frequency values ​​are represented in the LCD Display to a few points about a number of panels required number keys to set the frequency directly, or set the Delta Step with the UP / DOWN buttons or the Rotary Switch and Delta Step variable frequency.

    RF output level
    RF level setting range is-14dBμV ~ 126dBμV (EMF),-127dBm ~ +13 dBm with a panel of the unit key can change the RF level of the unit mV / μV and dBm, dBμV, etc. Frequency values ​​are represented in the LCD Display to a few points below a number of panels of the number keys to set the level directly, or set the Delta Step with the UP / DOWN buttons or the Rotary Switch and Delta Step variable frequency.

    Store / recall functions <BR> in the internal memory address (00 to 99) can be stored in the carrier frequency, FM / AM modulation or modulation or value, RF level value, the value of Delta Step, etc., when necessary, re-use . Now with a memory address that in the LCD, according to panel number keys enter the memory address directly, or set the Delta Step, then the use of variable address Rotary Switch and Delta Step. Moreover, with the UP / DOWN keys can be used repeatedly in any part of the memory locations. (Address Rotetion)


    • Specifications:
    • ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source    
    Technical parameters: 
    Frequency 
    Range 
    5KHz ~ 1100MHz
    Show 
    16 × 2LCD (maximum 9 performance)
    Resolution 
    5kHz-499.9MHz (1kHz, 1.25kHz)
    500MHz-1100MHz (2.5kHz)
    Accuracy 
    ± 1PPM (1 × 10-6)

    Modulation 
    Modulation 
    AM and FM
    Internal modulation source 
    400Hz and 1kHz ± 2%
    External modulation source 
    Input impedance 
    100kΩ
    Input Level 
    0-2Vrms
    Frequency 
    Input Range: AM: 20Hz-10kHz FM: 20Hz-100kHz
    Response: ± dB or less (but 1KHz basis) (Typical ± 1dB)
    AM 
    Setting range: 0.0% ~ 99.9%
    Display: 16 × 2LCD (maximum 3 contains the performance of the decimal point)
    Resolution: 0.1%
    Accuracy: ± 5%
    Residual Noise: 50dB the following (AM30% of the time)
    Distortion: 1.0% (Typical0.5%) but the modulation in the AM 30%, AF 1KHz, 50Hz ~ 15KHz
    FM 
    Range: 0.0KHz ~ 100.0KHz
    Display: 16 × 2LCD (maximum 4 contains the performance of the decimal point)
    Resolution: 0.1KHz
    Accuracy: ± 3%
    Distortion: 1.0% (Typical), but the modulation in the FM 75.0KHz, AF 1KHz, 50μsDe-Emphasis, 50Hz ~ 15KHz

    Output Level 
    Setting range 
    -14.0dBμV ~ 126.0dBμV (EMF)
    = (-127.0dBm ~ 13.0dBm, 0.2μV ~ 2.0V)
    Setting unit 
    dBμ / dBm / mV / μV
    Show 
    16 × 2LCD (maximum 4 contains the performance of the decimal point)
    Resolution 
    0.1dBμV (0.001μV)
    Accuracy 
    ATTENUATOR 
    1.5dB (100dBμV ~ 126dBμV)
    ± 2dB (-14dBμV ~ 100dBμV)
    Output impedance 
    50Ω
    Spurious & Harmonics 
    -30dBc the following (110MHz, when)
    Residual Modulation (S / N) 
    AM Component:-50dB or more (to AM 30% benchmark)
    FM Component: 70dB or more (baseline to FM 75KHz, 110KHz, when the following)
    ADDRESS 
    100 group memory (0 to 99)

    ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source
    ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source
    ATTEN AT8010D High Frequency Standard Signal Generator / RF Signal Source

    New Reviews:
    Indicates required fields*
    Value for Price:
    Quality:
    Appearance:
    Your Name:*
    Your Email:*
    Review Title: *

    Content:*

    Verification code:*
      Recently viewed
  • {%salePrice%}

  • Safe and secure purchase with us   Privacy policy    Terms and Conditions
    Copyright 2007-2013 TOTOBAY E-COMMERCE LIMITED
    Hot Products:China Mobile Phone,HiPhone ,WIFI Phone,Cheap Cell Phone,Watch Phone
    Product Tags: ABCDEFGHIJKLMNOPQRSTUVWXYZ0-9

    Buy mobile phones at wholesale price from leading Chinese wholesaler,china phone wholesaler

    Phone accessories Wholesale Electronics from China, Buy Wholesale Phone Accessorie From Chinese Wholesaler.